- Frequency4.9-5.9 GHz
- Max PowerEIRP<33dbm
- Input9-36V
- Weight40.0g
- ConnectorRP-SMA inner hole
The Aomway ApexLink Lite adopts OFDM and MIMO technology, automatically detecting interfering channels in the environment and performing automatic frequency hopping. With an ultra-wide 4.9 GHz–5.9 GHz bandwidth, it supports custom channels and up to 48 communication channels. Maximum bandwidth is 20 MHz with automatic bitrate adaptation. It delivers industry-leading receiver sensitivity of −115 dBm at 2 MHz, and combines ultra-high-gain omnidirectional and directional antenna technology, enabling a transmission range of over 18 KM in a clean electromagnetic environment. It supports the SBUS protocol for drone control with signal latency below 5 ms. Using H.265 and VCC hybrid codec technology, the 1080P60 signal achieves glass-to-glass latency below 60 ms; if even lower latency is required, 30 ms can be achieved by increasing the camera frame rate. It also supports connecting a smartphone via the Type-C interface to display the live video feed in real time, or to connect to QGroundControl or Mission Planner, working together with the MAVLink protocol to complete full end-to-end link interoperability.
Key Features
- OFDM + MIMO Technology — ultra-wide bandwidth with AES encryption for secure, interference-resistant links
- 1080P60 Real-Time Video — 1/1.8 sensor camera with G9 lens and 2MP resolution, latency under 60ms
- Ultra-Low Datalink Latency — under 5ms for responsive telemetry and control
- Dual-Transmit 2T2R Architecture — EIRP<33dbm, 4 power level output or automatic power adjustment
- Real-Time Link Signal Display — live RSSI monitoring with auto frequency hopping
- Multi-Protocol Support — MCP, MAVLink and SBUS ground-station compatibility
- Direct Android Connection — DP interface for phone viewing or QGroundControl/Mission Planner
- Receiver Sensitivity — -115 dBm at 2 MHz bandwidth for long-range reliability
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Aomway apexlink lite 4.9GHZ-5.9Ghz 1080P60fps MCPS/Mavlink/sbus 18KM |
| Frequency Range | 4.9-5.9 GHz |
| Output Power | EIRP<33dbm, 4 power level or auto |
| Channels | 32CH |
| Control Protocol | MCP/Mavlink |
| Antenna Connector | RP-SMA inner hole |
| Input Voltage | 9-36V |
| Weight | 40.0g |
| Dimensions | 35*35*14 mm |
| SKU | Aomway apexlink Lite |
Frequency Plan & Pinout
Band and channel data below is taken from this unit’s own published specification table.
| Item | Value |
|---|---|
| Frequency Range | 4.9-5.9 GHz |
| Channels | 32CH |
| Control Protocol | MCP/Mavlink |
Awaiting source data: the connector pinout drawing, the per-revision button / jumper sequence for band and power selection, and the downloadable PDF datasheet are not yet published for this model. Aomway will not print a wiring diagram it has not verified — request the engineering package and we will send the signed drawing for your hardware revision.
Request Datasheet & Pinout (PDF)Read the Technical DocsRecommended Accessories
Matching the antenna and cabling to the band is what actually decides usable range. These are the parts we ship alongside this unit most often.
Aomway 5.8GHz FPV Directional Antenna 12dBi Yagi
High-gain directional antenna for the 5.8 GHz band – extends usable range well beyond a stock whip.
View product →Aomway 7G-8.7G RHCP 4dBi Antenna
RHCP antenna covering the 7-8.7 GHz band for high-band long-range links.
View product →Aomway 7G-9G RHCP 13dBi Patch Antenna
13 dBi patch antenna for the 7-9 GHz band – the highest-gain option for ground-station use.
View product →Aomway Commander V2 FPV Goggles
Commander V2 goggles – the ground-station display we build and support ourselves.
View product →Also required for a complete install: a coax extension / antenna pigtail cut for this band, and an LC filter module for noisy power rails. Both are supplied on request — email [email protected] with your airframe and we will spec the correct length and connector.
Browse all antennasBrowse all video transmitters